Lombardini Marine Spare parts

Engine spare parts
Active filters

Family

Model

Category

In this section you will find a wide range of Original spare parts for Lombardini Marino engines. We offer quality products and the best service.

ED0070511440-S
Available in Stock
Single groove pulley with a diameter of 85 mm and a height of 38 mm, designed for use on Lombardini LDW 1204/T, LDW 1003, LDW 1204, LDW 1404, LDW 502, LDW 602, LDW 702 and LDW 90 engines. This component is a genuine Lombardini Kohler spare part, guaranteeing compatibility and proper fit on the models mentioned. Its specific design allows for easy installation and optimal operation in industrial and agricultural applications.
€67.16
ED0021000890-S
Available in Stock
12V heater compatible with Lombardini 15LD225, 15LD315, 15LD350, 15LD400, LDW 1503, LDW 2004, LDW 2004/T, LDW 1204/T and LD engines. This component is an original Lombardini Kohler spare part, designed to provide efficient starting in low temperature conditions. Its installation is direct and adapts to the mentioned models, ensuring optimal engine operation.
€26.86
ED0021001110-S
Available in Stock
12V heater compatible with Lombardini LDW 1603, LDW 2204, and LDW 2204/T engines. This component is a genuine Lombardini Kohler replacement, designed to ensure efficient starting in cold conditions. It installs directly on the aforementioned models, ensuring optimal operation of the engine heating system. Ideal for industrial and agricultural applications where effective engine warm-up is required.
€22.87
ED0035871420-S
Available in Stock
12V solenoid valve compatible with Lombardini LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is an original Lombardini Kohler spare part, designed to ensure proper operation in fluid control systems. It is easily installed and adapts to the technical specifications of the aforementioned models, ensuring the correct operation of the hydraulic system.
€84.70
ED0089900470-S
Available in Stock
18mm engine block plug, a genuine Lombardini Kohler replacement, designed to ensure a tight seal on the engine block in a variety of industrial and agricultural applications. This component is essential for preventing fluid leaks and maintaining system integrity. Compatible with Lombardini Kohler engines requiring an 18mm diameter plug. Proper installation is crucial for proper engine operation and damage prevention. It is recommended to verify compatibility with the specific model before installation.
€1.09
ED0085650830-S
Available in Stock
2-wire alternator with ceramic rotor, designed for 12V systems and a maximum capacity of 30A. Compatible with Lombardini 15LD225, 15LD315, 15LD350, LDW 1003 and LD engines. This component is a genuine Lombardini Kohler replacement, ensuring proper integration and operation in the applications mentioned. Its specific design ensures optimal performance in generating electrical power for the ignition and accessory systems of compatible engines.
€88.94
ED0035871350-S
Contact us
24V solenoid valve compatible with Lombardini LDW 1003, LDW 1204, LDW 1404, LDW 602, LDW 702 and LDW 903 engines. This component is an original Lombardini Kohler spare part, designed to ensure optimal operation in fluid control systems. Its installation is simple and integrates perfectly into the hydraulic circuits of the aforementioned models, ensuring a precise response in the activation and deactivation of functions. Ideal for maintaining the operation of Lombardini engines in industrial and agricultural applications.
€102.85
ED0089900220-S
Available in Stock
30mm block plug, an alternative replacement from LM-Parts , designed for use in Lombardini Kohler engines. This component is essential for sealing the engine block, ensuring the integrity of the lubrication system and preventing leaks. Compatible with a variety of Lombardini Kohler engine models, this plug ensures a precise fit and easy installation. Its specific design allows for proper internal pressure, contributing to optimal engine performance.
€1.82
ED0045801850-S
Available in Stock
3rd PTO Gasket for Lombardini LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is an original Lombardini Kohler spare part, designed to ensure proper sealing in the power transmission. Its installation is essential to prevent leaks and ensure the correct operation of the PTO system. Compatible with the aforementioned models, this gasket is essential for the maintenance and operation of industrial and agricultural engines in the LDW series.
€6.41
ED0087411170-S
Contact us
5" air filter bracket compatible with Lombardini LDW 1503, LDW 1603, LDW 2004 and LDW 2204 engines. This component is a genuine Lombardini Kohler replacement, designed to ensure proper fit and alignment of the air filter on the aforementioned engines. Proper installation is essential for optimal operation of the air intake system, ensuring engine integrity and long-term performance.
€88.94
ED0037004550-S
Contact us
5'' air filter with safety air filter, compatible with Lombardini 12LD475-2, 9LD561-2, LDW 1503, LDW 1603, LDW 1204/T and LD engines. This product is an original Lombardini Kohler spare part, designed to ensure proper air filtration in industrial and agricultural applications. Its construction ensures protection of the engine against contaminating particles, contributing to its optimal maintenance. 5'' air filter with safety air filter, compatible with Lombardini 12LD475-2, 9LD561-2, LDW 1503, LDW 1603, LDW 1204/T and LD engines. This component is an...
€142.78
ED0089900540-S
Available in Stock
50mm block plug, a genuine Lombardini Kohler replacement, designed to ensure proper sealing in the cooling system of industrial and agricultural engines. This component is compatible with various models in the Lombardini series, ensuring the integrity of the cooling circuit and preventing leaks. Installation is simple, and it is recommended to follow the manufacturer's specifications for optimal fit. Ideal for maintaining proper engine operation in demanding applications.
€5.81
ED0037004600-S
Available in Stock
7" air filter with safety air filter, specifically designed for Lombardini LDW 2204 engines. This component is a genuine Lombardini Kohler replacement, ensuring compatibility and proper fit in industrial and agricultural applications. Its design allows for proper air filtration, protecting the engine from contaminants and ensuring optimal operation. Compatible with LDW series models, this filter is essential for proper maintenance of the engine's air intake system.
€185.13
ED0037004560-S
Available in Stock
5'' air filter compatible with Lombardini engines models 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603, LDW 2004, LDW 2204 and LDW 2204/T. This component is an original Lombardini Kohler spare part, designed to ensure correct air filtration in the intake system, contributing to optimal engine performance. Its installation is simple and periodic replacement is recommended to maintain the integrity of the system. 5'' air filter compatible with Lombardini engines models 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603, LDW 2004, LDW 2204 and LDW...
€127.05
ED0037004570-S
Contact us
7'' air filter compatible with Lombardini 5LD930-3, LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T, LDW 1204/T and LDW 1204 engines. This component is an original Lombardini Kohler spare part, designed to ensure proper air flow and engine protection in various industrial and agricultural applications. Its installation is simple and its periodic replacement is recommended to maintain optimal engine operation.
€160.93
ED0021751240-S
Available in Stock
5'' air filter cartridge compatible with Lombardini engines 12LD475-2, 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603, LDW 2004. This spare part is original from the Lombardini Kohler brand, designed to ensure proper air filtration in industrial and agricultural engines. Its installation is simple and periodic replacement is recommended to maintain proper engine operation. 5'' air filter cartridge compatible with Lombardini engines models 12LD475-2, 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603, LDW 2004. This spare part is original from the...
€51.43
ED0021751250-S
Available in Stock
5'' air filter cartridge compatible with Lombardini 12LD475-2, 9LD561-2, LDW 1503, LDW 1603, LDW 1204/T, LDW 1003, LDW 1204 engines. This spare part is original from the Lombardini Kohler brand, designed to ensure proper air filtration in industrial and agricultural engines. Its installation is simple and is recommended to maintain the correct operation of the air intake system, contributing to the protection of the engine and optimizing its operating performance. 5'' air filter cartridge compatible with Lombardini 12LD475-2, 9LD561-2, LDW 1503, LDW...
€32.07
ED0021751260-S
Available in Stock
7'' air filter cartridge compatible with Lombardini 5LD930-3, LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This spare part is original from the Lombardini Kohler brand, designed to ensure correct air filtration in diesel engines of the LDW series. Its proper installation contributes to optimal engine maintenance, ensuring efficient operation in various industrial and agricultural applications.
€57.48
ED0036171910-S
Available in Stock
5" air filter clamp compatible with Lombardini LDW 1503, LDW 1603, LDW 2004 and LDW 2204 engines. This component is a genuine Lombardini Kohler replacement, designed to ensure a proper fit and effective sealing in the air intake system. Its robust construction guarantees the integrity of the air filter, contributing to the proper functioning of the engine. Ideal for industrial and agricultural applications where proper maintenance of air filtration systems is required.
€48.04
LOMBARDINI 5'' AIR FILTER CLAMP: LDW 1503,LDW 1603,LDW 2004,LDW 2204
  • On sale!
  • -40%
ED0036171870-S
Available in Stock
5" air filter clamp for Lombardini LDW and CHD engines. This component is a genuine Lombardini Kohler replacement, designed to ensure proper air filter retention and optimal sealing in the intake system. Compatible with a variety of Lombardini engine models, this clamp is essential for maintaining the air filtration system, contributing to proper engine operation. Installation is simple, and it is recommended to verify compatibility with the specific engine model before use.
€31.58 €52.64
ED0021360530-S
Available in Stock
5'' air filter hat compatible with Lombardini 12LD475-2, 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603 and LD engines. This component is an original Lombardini Kohler spare part, designed to ensure proper air filtration in the intake system, contributing to the correct operation of the engine. Its specific design allows easy installation and precise fit on the mentioned models, guaranteeing the integrity of the air system. 5'' air filter hat compatible with Lombardini 12LD475-2, 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603 and LD engines. This...
€51.43
AIR FILTER HAT 7'' LOMBARDINI: 5LD930-3,LDW 1503,LDW 1603,LDW 2004,LDW 2204,LDW 2004/T,LDW
  • -40%
ED0021360540-S
Contact us
7'' air filter cap for Lombardini 5LD930-3, LDW 1503, LDW 1603, LDW 2004, LDW 2204 and LDW 2004/T engines. This component is an original Lombardini Kohler spare part, designed to ensure proper air filtration in the intake systems of the aforementioned engines. Its installation is essential for the correct operation of the engine, ensuring the protection of internal components against contaminants. Compatible only with the specified models.
€37.39 €62.32
ED0053650820-S
Contact us
5" air filter tube compatible with Lombardini LDW 1503, LDW 1603, LDW 2004, LDW 2204 and LDW 2204/T engines. This component is a genuine Lombardini Kohler replacement, designed to ensure proper airflow through the intake system, contributing to the proper functioning of the engine. Installation is straightforward, and it is recommended to follow the manufacturer's specifications to ensure an optimal fit.
€52.03
ED0011573260-S
Contact us
12V 40A Lombardini LDW FOCS alternator, genuine Lombardini Kohler replacement, designed to provide a reliable power source for industrial and agricultural engines. This alternator is compatible with Lombardini LDW and FOCS engine models, ensuring precise fit and optimal operation. Its robust construction guarantees durability suitable for demanding applications. Ideal for replacing defective units, this alternator meets the technical specifications required for adequate performance in industrial environments.
€423.50
LDW 1503,LDW 1603,LDW 2004,LDW 2204,LDW 2004/T,LDW 2204/T,LDW
  • -10%
ED0011573600-S
Available in Stock
12V-45A alternator compatible with Lombardini LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is an original Lombardini Kohler spare part, designed to provide the necessary electrical power in industrial and agricultural applications. Its robust construction ensures proper operation under demanding conditions, guaranteeing compatibility with the mentioned models.
€356.10 €395.67
ED0024400060-S
Contact us
617 mm alternator belt for Lombardini LDW 502 and LDW 702/P engines. This component is a genuine Lombardini Kohler replacement part, designed to ensure optimal operation of the engine's charging system. Its installation is compatible with the aforementioned models, ensuring proper power transmission between the alternator and the engine. It is recommended to check the engine specifications before installation to ensure compatibility.
€21.42
ED0021861430-S
Available in Stock
For Lombardini engines: LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T, LDW 2204/T, LDW 1. Alternator cable with 12V diode for Lombardini engines LDW1503, LDW1603, LDW2004 and LDW2204. This component is an original Lombardini Kohler spare part, designed to ensure the correct electrical connection between the alternator and the engine charging system. Its construction ensures efficient current transmission, contributing to the optimal functioning of the electrical system. Compatible exclusively with the models mentioned above, this cable is...
€36.30
ED0087250600-S
Contact us
Alternator bracket 33 for Lombardini LDW 1003, LDW 1204, LDW 1404, LDW 602, LDW 702 and LDW 903 engines. This component is an original Lombardini Kohler spare part, designed to ensure correct mounting and operation of the alternator in the aforementioned models. Its manufacture meets the required technical specifications to ensure compatibility and precise fit during installation.
€41.75
Axial +0.10 Lombardini LDW 1503,LDW 1603,LDW 2004,LDW 2204,LDW 2004/T,LDW 2204/T
  • -80%
ED0012571680-S
Available in Stock
Technical product description: The Axial +0, 10 is an original Lombardini Kohler spare part, designed for the LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is essential for the correct operation of the injection system, ensuring proper fuel distribution. Its specific design ensures compatibility with the aforementioned models, facilitating installation and maintenance.
€30.25 €151.25
Axial +0.20 Lombardini LDW 1503,LDW 1603,LDW 2004,LDW 2204,LDW 2004/T,LDW 2204/T
  • On sale!
ED0012571690-S
Contact us
Technical product description: The Axial +0.20 Lombardini LDW CHD is an original spare part from the Lombardini Kohler brand, designed for use in industrial and agricultural engines of the LDW series. This component is essential for the correct functioning of the lubrication system, ensuring proper distribution of oil in the engine. Compatible with specific models of the LDW CHD range, its installation ensures maintenance of the manufacturer's technical specifications. It is recommended to verify compatibility with the engine model before installation.
€175.45
ED0012571590-S
Contact us
For Lombardini engines: LDW 602, 702, 903, 1003, 1204, 1404 valid for Kohler-Rehlko KDW 702, KDW 1033, KDW 1404 engines The Axial 0.10 is an original Lombardini Kohler spare part, designed to be compatible with LDW 602, 702, 903, 1003, 1204 and 1404 engines. This component is essential for the correct functioning of the lubrication system, ensuring adequate distribution of oil in the engine. Its specific design ensures precise installation and optimal performance in industrial and agricultural applications.
€20.45
ED0012571670-S
Available in Stock
Technical product description: The Axial std Lombardini LDW 1503, 1603, 2004, 2204 is an essential component for the correct operation of Lombardini Kohler engines. This original spare part guarantees compatibility with the mentioned models, ensuring a precise fit and optimal performance in industrial and agricultural applications. Its design is specifically adapted to the specifications of Lombardini engines, making it easy to install and maintain.
€18.88
ED0012571580-S
Available in Stock
The Axial Std for Lombardini LDW 602, 702, 903, 1003, 1204, and 1404 engines is a genuine Lombardini Kohler replacement part. This component is essential for the proper functioning of the timing system of the aforementioned engines, ensuring precise adjustment and reliable operation. Its design is specifically tailored to the technical specifications of the compatible models, ensuring proper integration into the engine's mechanical system.
€9.08
ED0092005950-S
Contact us
For Lombardini LDW 1503 engines, this cylinder head is discontinued, but we can offer a solution, please contact us. Lombardini LDW 1503 bare cylinder head, genuine Lombardini Kohler spare part, designed for LDW series engines. This cylinder head is compatible with LDW 1503 models, ensuring a precise fit and proper assembly. Manufactured to technical specifications that meet the manufacturer's standards, this part is essential for the proper functioning of the engine. Installation by qualified technical personnel is recommended to ensure system...
€1,282.60
ED0092011270-S
Contact us
Lombardini LDW 1603 bare cylinder head, genuine Lombardini Kohler replacement. Designed for LDW series diesel engines, this cylinder head is compatible with industrial and agricultural applications. Its construction allows for proper gas distribution and an optimal fit in the engine block. This is essential for proper engine operation, ensuring the integrity of the combustion system. It is recommended to verify compatibility with the specific model before installation.
€1,236.62
ED0069277060-S
Contact us
Belt guard with 1 dust ring, compatible with Lombardini LDW 1003, LDW 1204, LDW 1404, LDW 602, LDW 702, LDW 903 and LD engines. This component is an original Lombardini Kohler spare part, designed to ensure correct coverage and protection of the belt, preventing the entry of dust and contaminants. Proper installation contributes to the maintenance of the engine's transmission system, ensuring optimal operation in industrial and agricultural applications.
€79.86
ED0069277050-S
Available in Stock
Belt guard with 2 dust rings for Lombardini LDW 1204/T, LDW 1003, LDW 1204, LDW 1404, LDW 602 and LDW 70 engines. This component is essential for safeguarding the engine belt against the ingress of dust and contaminants, ensuring optimal operation. This spare part is original Lombardini Kohler , guaranteeing compatibility and a precise fit on the mentioned models. Its robust design allows for simple and effective installation, contributing to the durability of the engine's transmission system.
€79.86
ED0046800810-S
Available in Stock
Belt protection gasket compatible with Lombardini LDW 1003, LDW 1204, LDW 1404, LDW 602, LDW 702 and LDW 903 engines. This spare part is an original Lombardini Kohler component, designed to ensure proper protection and operation of the belts in the aforementioned engines. Proper installation contributes to the integrity of the transmission system, preventing premature wear and ensuring an effective seal.
€43.56
ED0065314680-S
Available in Stock
Bosch injector nozzle compatible with Lombardini LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is an original Lombardini Kohler spare part, designed to ensure optimal operation of the injection system. Its precise fuel atomization contributes to proper engine performance, ensuring proper mixing and combustion. The installation of this nozzle is essential to maintain the integrity of the injection system and engine performance in industrial and agricultural applications.
€66.55
ED0044301000-S
Available in Stock
Breather gasket compatible with Lombardini LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is essential for the correct operation of the engine's ventilation system, ensuring proper air circulation and preventing internal pressure buildup. This spare part is genuine Lombardini Kohler , ensuring compatibility and a precise fit on the models mentioned.
€13.79
Leva tree (2400 rpm) Lombardini LDW 1503,LDW 1603
  • On sale!
  • -40%
ED0010115640-S
Available in Stock
Camshaft (2400 rpm) for Lombardini LDW 1503 and LDW 1603 engines. This component is a genuine Lombardini Kohler replacement, designed to ensure proper engine timing and optimal valve operation. Its precision manufacturing ensures a perfect fit on the models mentioned, helping to maintain the manufacturer's specifications. Ideal for industrial and agricultural applications where replacement of this critical component is required.
€497.31 €828.85
ED0015801670-S
Contact us
Camshaft bushing compatible with Lombardini LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is a genuine Lombardini Kohler spare part, designed to ensure precise fit and proper operation of the engine's timing system. Its main function is to provide support and alignment to the camshaft, ensuring smooth and efficient movement. Its installation is recommended in engines that require maintenance or replacement of camshaft system parts.
€12.34
TUERCA CAP M 14 LOMBARDINI: 15LD225,15LD315,15LD350,LDW 1003,LDW 1204,LDW 1404,LDW 502,LDW 502 CITYCA
  • On sale!
ED0015700450-S
Contact us
M14 cap nut for Lombardini engines. This component is a genuine Lombardini Kohler replacement part, designed to ensure a precise fit and proper sealing in industrial and agricultural applications. Compatible with various Lombardini engine models, this nut is essential for proper lubrication system maintenance. Its manufacture meets the technical specifications required to ensure engine integrity.
€6.41
ED0016112050-S
Available in Stock
Standard center crankshaft bearing for Lombardini LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is essential for the correct operation of the crankshaft system, ensuring proper alignment and support. This is a genuine Lombardini Kohler spare part, specifically designed to meet the technical specifications of the aforementioned models, ensuring compatibility and reliability in your application.
€20.45