LDW FOCS series

Engine spare parts
Active filters

Model

Category

Lombardini Series LDW FOCS engine spare parts

These two, three and four-cylinder engines, well atmospheric or turbo, are very common in Dumpers, lifting platforms, sweepers and construction machinery or municipalities (Ausa, Haulotte, Piquersa, MX Imer, Piaggio, etc.), compact tractors (Pasquali, BCS, Ferrrari, Valpadana, Agriax, Antonio Carraigiro, Alfatener

Built in block and aluminum foil and refrigerated by water.

In this series are the models LDW 502, LDW 602, LDW 702, LDW 903, LDW 1003, LDW 1204 and LDW 1404.

ED0070511440-S
Available in Stock
Single groove pulley with a diameter of 85 mm and a height of 38 mm, designed for use on Lombardini LDW 1204/T, LDW 1003, LDW 1204, LDW 1404, LDW 502, LDW 602, LDW 702 and LDW 90 engines. This component is a genuine Lombardini Kohler spare part, guaranteeing compatibility and proper fit on the models mentioned. Its specific design allows for easy installation and optimal operation in industrial and agricultural applications.
ED0021000890-S
Available in Stock
12V heater compatible with Lombardini 15LD225, 15LD315, 15LD350, 15LD400, LDW 1503, LDW 2004, LDW 2004/T, LDW 1204/T and LD engines. This component is an original Lombardini Kohler spare part, designed to provide efficient starting in low temperature conditions. Its installation is direct and adapts to the mentioned models, ensuring optimal engine operation.
ED0089900470-S
Available in Stock
18mm engine block plug, a genuine Lombardini Kohler replacement, designed to ensure a tight seal on the engine block in a variety of industrial and agricultural applications. This component is essential for preventing fluid leaks and maintaining system integrity. Compatible with Lombardini Kohler engines requiring an 18mm diameter plug. Proper installation is crucial for proper engine operation and damage prevention. It is recommended to verify compatibility with the specific model before installation.
ED0085650830-S
Available in Stock
2-wire alternator with ceramic rotor, designed for 12V systems and a maximum capacity of 30A. Compatible with Lombardini 15LD225, 15LD315, 15LD350, LDW 1003 and LD engines. This component is a genuine Lombardini Kohler replacement, ensuring proper integration and operation in the applications mentioned. Its specific design ensures optimal performance in generating electrical power for the ignition and accessory systems of compatible engines.
ED0035871350-S
Contact us
24V solenoid valve compatible with Lombardini LDW 1003, LDW 1204, LDW 1404, LDW 602, LDW 702 and LDW 903 engines. This component is an original Lombardini Kohler spare part, designed to ensure optimal operation in fluid control systems. Its installation is simple and integrates perfectly into the hydraulic circuits of the aforementioned models, ensuring a precise response in the activation and deactivation of functions. Ideal for maintaining the operation of Lombardini engines in industrial and agricultural applications.
ALTERNADOR 3 CABLES (ROTOR CERAMICA 12V 40A) LOMBARDINI: LDW 502 CITYCAR P/F
  • -40%
ED0085650940-S
Available in Stock
3-wire alternator with ceramic rotor, designed for applications in Lombardini LDW 502 engines. This alternator operates at 12V and has a capacity of 40A, ensuring adequate power for the operation of the engine systems. It is a genuine Lombardini Kohler replacement, ensuring compatibility and a perfect fit with the specified models. Ideal for maintaining the operational efficiency of agricultural and industrial machinery using this type of engine.
ED0089900220-S
Available in Stock
30mm block plug, an alternative replacement from LM-Parts , designed for use in Lombardini Kohler engines. This component is essential for sealing the engine block, ensuring the integrity of the lubrication system and preventing leaks. Compatible with a variety of Lombardini Kohler engine models, this plug ensures a precise fit and easy installation. Its specific design allows for proper internal pressure, contributing to optimal engine performance.
400mm Kohler KDI and Lombardini LDW fan
  • -40%
ED0097183060-S
Avaliable
Original fan for Kohler-Rehlko KDI 1903, 2504 and 3404 engines and Lombardini LDW 1603, 2204 engines. 400 mm fan compatible with Kohler-Rehlko KDI and Lombardini LDW engines. This component is an original spare part of the Lombardini Kohler brand, designed to ensure proper airflow in industrial and agricultural engine cooling systems. Its installation is direct on the specified models, ensuring a precise and functional fit. This fan is essential for optimal maintenance of the cooling system, contributing to the correct operation of the engine in...
ED0037004550-S
Contact us
5'' air filter with safety air filter, compatible with Lombardini 12LD475-2, 9LD561-2, LDW 1503, LDW 1603, LDW 1204/T and LD engines. This product is an original Lombardini Kohler spare part, designed to ensure proper air filtration in industrial and agricultural applications. Its construction ensures protection of the engine against contaminating particles, contributing to its optimal maintenance. 5'' air filter with safety air filter, compatible with Lombardini 12LD475-2, 9LD561-2, LDW 1503, LDW 1603, LDW 1204/T and LD engines. This component is an...
ED0037004560-S
Available in Stock
5'' air filter compatible with Lombardini engines models 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603, LDW 2004, LDW 2204 and LDW 2204/T. This component is an original Lombardini Kohler spare part, designed to ensure correct air filtration in the intake system, contributing to optimal engine performance. Its installation is simple and periodic replacement is recommended to maintain the integrity of the system. 5'' air filter compatible with Lombardini engines models 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603, LDW 2004, LDW 2204 and LDW...
ED0037004570-S
Contact us
7'' air filter compatible with Lombardini 5LD930-3, LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T, LDW 1204/T and LDW 1204 engines. This component is an original Lombardini Kohler spare part, designed to ensure proper air flow and engine protection in various industrial and agricultural applications. Its installation is simple and its periodic replacement is recommended to maintain optimal engine operation.
ED0021751240-S
Available in Stock
5'' air filter cartridge compatible with Lombardini engines 12LD475-2, 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603, LDW 2004. This spare part is original from the Lombardini Kohler brand, designed to ensure proper air filtration in industrial and agricultural engines. Its installation is simple and periodic replacement is recommended to maintain proper engine operation. 5'' air filter cartridge compatible with Lombardini engines models 12LD475-2, 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603, LDW 2004. This spare part is original from the...
ED0021751250-S
Available in Stock
5'' air filter cartridge compatible with Lombardini 12LD475-2, 9LD561-2, LDW 1503, LDW 1603, LDW 1204/T, LDW 1003, LDW 1204 engines. This spare part is original from the Lombardini Kohler brand, designed to ensure proper air filtration in industrial and agricultural engines. Its installation is simple and is recommended to maintain the correct operation of the air intake system, contributing to the protection of the engine and optimizing its operating performance. 5'' air filter cartridge compatible with Lombardini 12LD475-2, 9LD561-2, LDW 1503, LDW...
ED0021751260-S
Available in Stock
7'' air filter cartridge compatible with Lombardini 5LD930-3, LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This spare part is original from the Lombardini Kohler brand, designed to ensure correct air filtration in diesel engines of the LDW series. Its proper installation contributes to optimal engine maintenance, ensuring efficient operation in various industrial and agricultural applications.
ED0021360530-S
Available in Stock
5'' air filter hat compatible with Lombardini 12LD475-2, 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603 and LD engines. This component is an original Lombardini Kohler spare part, designed to ensure proper air filtration in the intake system, contributing to the correct operation of the engine. Its specific design allows easy installation and precise fit on the mentioned models, guaranteeing the integrity of the air system. 5'' air filter hat compatible with Lombardini 12LD475-2, 9LD561-2, 9LD625-2, 9LD626-2, LDW 1503, LDW 1603 and LD engines. This...
ED0021360540-S
Contact us
7'' air filter cap for Lombardini 5LD930-3, LDW 1503, LDW 1603, LDW 2004, LDW 2204 and LDW 2004/T engines. This component is an original Lombardini Kohler spare part, designed to ensure proper air filtration in the intake systems of the aforementioned engines. Its installation is essential for the correct operation of the engine, ensuring the protection of internal components against contaminants. Compatible only with the specified models.
ED0011573260-S
Contact us
12V 40A Lombardini LDW FOCS alternator, genuine Lombardini Kohler replacement, designed to provide a reliable power source for industrial and agricultural engines. This alternator is compatible with Lombardini LDW and FOCS engine models, ensuring precise fit and optimal operation. Its robust construction guarantees durability suitable for demanding applications. Ideal for replacing defective units, this alternator meets the technical specifications required for adequate performance in industrial environments.
LDW 1503,LDW 1603,LDW 2004,LDW 2204,LDW 2004/T,LDW 2204/T,LDW
  • -10%
ED0011573600-S
Available in Stock
12V-45A alternator compatible with Lombardini LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T and LDW 2204/T engines. This component is an original Lombardini Kohler spare part, designed to provide the necessary electrical power in industrial and agricultural applications. Its robust construction ensures proper operation under demanding conditions, guaranteeing compatibility with the mentioned models.
ED0024400060-S
Contact us
617 mm alternator belt for Lombardini LDW 502 and LDW 702/P engines. This component is a genuine Lombardini Kohler replacement part, designed to ensure optimal operation of the engine's charging system. Its installation is compatible with the aforementioned models, ensuring proper power transmission between the alternator and the engine. It is recommended to check the engine specifications before installation to ensure compatibility.
ED0021861430-S
Available in Stock
For Lombardini engines: LDW 1503, LDW 1603, LDW 2004, LDW 2204, LDW 2004/T, LDW 2204/T, LDW 1. Alternator cable with 12V diode for Lombardini engines LDW1503, LDW1603, LDW2004 and LDW2204. This component is an original Lombardini Kohler spare part, designed to ensure the correct electrical connection between the alternator and the engine charging system. Its construction ensures efficient current transmission, contributing to the optimal functioning of the electrical system. Compatible exclusively with the models mentioned above, this cable is...
ED0087250600-S
Available in Stock
Alternator bracket 33 for Lombardini LDW 1003, LDW 1204, LDW 1404, LDW 602, LDW 702 and LDW 903 engines. This component is an original Lombardini Kohler spare part, designed to ensure correct mounting and operation of the alternator in the aforementioned models. Its manufacture meets the required technical specifications to ensure compatibility and precise fit during installation.
ED0012570820-S
Contact us
The Axial +0.10 is a genuine Lombardini Kohler replacement part, specifically designed for LDW 502 engines. This component is essential for the proper functioning of the lubrication system, ensuring proper oil distribution throughout the engine. Its precise design ensures compatibility with the aforementioned models, contributing to the integrity of the mechanical system. Its installation is recommended in industrial and agricultural environments where Lombardini LDW 502 engines are used.
Axial +0.20 Lombardini LDW 502,LDW 502 citycar al,LDW 502 citycar P/F
  • -80%
ED0012570830-S
Available in Stock
The Axial +0.20 is a component designed for Lombardini LDW 502 engines. This genuine replacement guarantees compatibility and a precise fit in the LDW 502 series, ensuring optimal engine performance. Its specific design allows for simple and effective installation, while maintaining the manufacturer's technical specifications. This product is essential for the maintenance and repair of Lombardini Kohler engines, ensuring the integrity of the lubrication system.
ED0012571590-S
Contact us
For Lombardini engines: LDW 602, 702, 903, 1003, 1204, 1404 valid for Kohler-Rehlko KDW 702, KDW 1033, KDW 1404 engines The Axial 0.10 is an original Lombardini Kohler spare part, designed to be compatible with LDW 602, 702, 903, 1003, 1204 and 1404 engines. This component is essential for the correct functioning of the lubrication system, ensuring adequate distribution of oil in the engine. Its specific design ensures precise installation and optimal performance in industrial and agricultural applications.
ED0012570810-S
Available in Stock
The Axial std Lombardini LDW 502 is an essential component for Lombardini LDW 502 engines. This genuine replacement part guarantees compatibility and a precise fit for industrial and agricultural applications. Designed specifically for the models mentioned above, its installation ensures proper engine operation, maintaining the required technical specifications. This product is part of the Lombardini Kohler genuine replacement parts catalog, ensuring the integrity and performance of the powertrain.
ED0012571580-S
Available in Stock
The Axial Std for Lombardini LDW 602, 702, 903, 1003, 1204, and 1404 engines is a genuine Lombardini Kohler replacement part. This component is essential for the proper functioning of the timing system of the aforementioned engines, ensuring precise adjustment and reliable operation. Its design is specifically tailored to the technical specifications of the compatible models, ensuring proper integration into the engine's mechanical system.
ED0069275040-S
Available in Stock
Belt guard for Lombardini LDW 502 engines. This component is a genuine Lombardini Kohler replacement part, designed to ensure the integrity and proper functioning of the power transmission system. Compatible with LDW 502 models, this guard prevents premature belt wear and ensures proper coverage of the mechanical components. Installation is simple, and it is recommended to follow the manufacturer's specifications for optimal fit.
ED0069277060-S
Contact us
Belt guard with 1 dust ring, compatible with Lombardini LDW 1003, LDW 1204, LDW 1404, LDW 602, LDW 702, LDW 903 and LD engines. This component is an original Lombardini Kohler spare part, designed to ensure correct coverage and protection of the belt, preventing the entry of dust and contaminants. Proper installation contributes to the maintenance of the engine's transmission system, ensuring optimal operation in industrial and agricultural applications.
ED0069277050-S
Available in Stock
Belt guard with 2 dust rings for Lombardini LDW 1204/T, LDW 1003, LDW 1204, LDW 1404, LDW 602 and LDW 70 engines. This component is essential for safeguarding the engine belt against the ingress of dust and contaminants, ensuring optimal operation. This spare part is original Lombardini Kohler , guaranteeing compatibility and a precise fit on the mentioned models. Its robust design allows for simple and effective installation, contributing to the durability of the engine's transmission system.
ED0046800810-S
Available in Stock
Belt protection gasket compatible with Lombardini LDW 1003, LDW 1204, LDW 1404, LDW 602, LDW 702 and LDW 903 engines. This spare part is an original Lombardini Kohler component, designed to ensure proper protection and operation of the belts in the aforementioned engines. Proper installation contributes to the integrity of the transmission system, preventing premature wear and ensuring an effective seal.
TUERCA CAP M 14 LOMBARDINI: 15LD225,15LD315,15LD350,LDW 1003,LDW 1204,LDW 1404,LDW 502,LDW 502 CITYCA
  • On sale!
ED0015700450-S
Contact us
M14 cap nut for Lombardini engines. This component is a genuine Lombardini Kohler replacement part, designed to ensure a precise fit and proper sealing in industrial and agricultural applications. Compatible with various Lombardini engine models, this nut is essential for proper lubrication system maintenance. Its manufacture meets the technical specifications required to ensure engine integrity.
ED0080259450-S
Contact us
Seal ring for Lombardini LDW 2004/T, LDW 2204/T, and LDW 1204/T engines. This component is essential for ensuring proper sealing of the combustion chamber, contributing to optimal engine performance. Manufactured to precise specifications, this spare part is genuine Lombardini Kohler , ensuring compatibility and an exact fit for the models mentioned. Proper installation is crucial for maintaining the integrity of the lubrication system and preventing leaks.
ED0066051310-S
Contact us
Complete oil pump for Lombardini LDW 1003 and LDW 502 engines. This component is a genuine Lombardini Kohler spare part, designed to ensure the proper functioning of the lubrication system in the engines mentioned above. The oil pump is crucial for maintaining engine integrity, ensuring proper lubricant circulation. This model has been discontinued and replaced by reference ED0066051370-S. Compatible only with the specified engines.
ED0066051370-S
Available in stock
Complete oil pump for Lombardini LDW 1003, LDW 502, and LDW 602 engines. This component is a genuine Lombardini Kohler replacement part, designed to ensure proper lubrication system operation in the engines mentioned above. Its installation is compatible with the specified models, ensuring precise and efficient integration into the engine system. This product is essential for maintaining engine integrity and optimal performance in industrial and agricultural applications.
ED0070511650-S
Available in Stock
Complete pulley with external alternator or belt tensioner for Lombardini LDW 1204/T, LDW 1003, and LDW 1204 engines. This component is a genuine Lombardini Kohler spare part, designed to ensure proper power transmission and optimal operation of the charging system. Its specific design allows for easy installation and perfect integration with the aforementioned models, ensuring compatibility and performance in industrial and agricultural applications.
ED0048964310-S
Available in Stock
Complete thermostat with water temperature sensor/thermometer sensor M16 (G 45A) for Lombardini LDW 1204/T and LDW 1204/L engines. This component is a genuine Lombardini Kohler spare part, designed to ensure precise temperature control of the cooling system. Its installation is compatible with the above models, ensuring optimal engine performance in a variety of industrial and agricultural applications.
ED0048962590-S
Contact us
Complete thermostat with water temperature sensor (G 45) and horizontal inlet (G 104) for Lombardini LDW 1204, L engines. This component is an original Lombardini Kohler spare part, designed to ensure precise control of the cooling system temperature. Its installation is compatible with the aforementioned models, ensuring proper adjustment and optimal engine operation. This thermostat is essential for the maintenance of the thermal system, contributing to the effective regulation of coolant flow.
ED0048962080-S
Available in Stock
Complete thermostat with water temperature sensor (G 45) for Lombardini LDW 1204/T, LDW 1003, LDW 1204, LDW 1404 engines. This component is an original Lombardini Kohler spare part, designed to guarantee precise control of the cooling system temperature. Its installation is compatible with the aforementioned models, ensuring optimal engine operation. The thermostat helps maintain the correct temperature, preventing overheating and ensuring engine durability in industrial and agricultural applications.
Connecting rod -0,25 Lombardini LDW 502,LDW 502 citycar al,LDW 502 citycar P/F
  • -80%
ED0015261990-S
Available in Stock
Connecting rod -0.25 for Lombardini LDW 502 engines. This component is a genuine Lombardini Kohler spare part, designed to ensure proper piston-to-crankshaft engagement in the engines mentioned above. Its construction meets the manufacturer's technical specifications, ensuring compatibility and a precise fit in LDW 502 models. This spare part is essential for the maintenance and repair of industrial and agricultural engines using this series.
ED0015262000-S
Contact us
Connecting rod -0.50 for Lombardini LDW 502 engines. This component is a genuine Lombardini Kohler spare part, designed to ensure proper connection between the piston and crankshaft in the engines mentioned above. Its manufacture complies with the manufacturer's technical specifications, ensuring compatibility and a precise fit in LDW 502 models. This spare part is essential for the maintenance and repair of industrial and agricultural engines that use this reference.
ED0016401170-S
Available in Stock
Connecting rod bearing -0.25 for Lombardini LDW 1204/T, LDW 1003, LDW 1204, LDW 1404, LDW 502 and LDW 602 engines. This component is a genuine Lombardini Kohler spare part, designed to ensure a precise fit and optimum operation in industrial and agricultural applications. Its specific design allows correct alignment and support of the connecting rod, contributing to engine durability. Compatible with the models mentioned above, this bearing is essential for the maintenance and repair of the Lombardini engines in question.